A liitle about the repeater

Both repeaters are located HERE, on the roof of Bath University overlooking the historic city of Bath

GB3UB is the 70cm 433mhz voice repeater and operates on 433.100/434.700mhz, ctcss 118.8hz. It uses a converted Storno base station using G8CUL logic running 10w to two Jaybeam folded dipoles. It provides hand-held coverage around the city of Bath, out towards Chippenham, down towards Midsomer Norton and across towards Westbury. It is internet linked via Echolink (node no. 201135 )
MB7UB is the APRS data digipeater.

You can find out what I do in my day job HERE.

For further information you can email me

21 September 2006

Working Well!!

Went to the uni yesterday and changed the radio over. Settings seem ok now and UB is really working well. Just shows what a read of the manual can do and having a good understanding of what is going on!!!
It is now running at the updated standard, which you can link to from www.great2play.co.uk

18 September 2006

Updated Settings

Went to site today and changed the rig to accept Tracen-n, WIDEn-n and APRS. However I left the uissid on which means some stations are showing multiple id numbers.I hope to go back up on Wednesday and sort it out.
Reports on how it is going would be appreciated.

15 September 2006

Changes to UI-View Settings

There has been a change in the way you should set up uiview.
There is a link from www.great2play.co.uk This has some good information on settings and has already had a big impact on the network.

13 September 2006

Well things are moving with APRS. More digi's etc. Also the standard for unproto g=has changed. for base it is APRS,TRACE3-3 and mobile APRS,RELAY,TRACE3-3. MB7UB is still set for TRACE7-7 and will not accept TRACE so a trip will be needed to change things.